Product Details

(Operating Position) = Horizontal
125 mm (front ring to plug) and 95 mm (rear cap to plug) silicon cables terminated with MATE-N-LOK plug no. 350809-1 with pins no. 926868-3 by AMP Inc.
It takes time for the mercury in the lamp to evaporate. Typically 95% of luminous output are generated after approximately 120 seconds. For quality inspection purposes allow for five minutes burning time.
Excessive airflow may lead to mercury condensation in the discharge lamp bulb and consequently to a performance drop.
Operation time after which either aperture lumens decrease to 50% of initial value or the lamp voltage reaches 115 V and the lamp cannot be ignited. Switching cycle: 210 minutes on / 30 minutes off.
Operational bulb wall temperatures lower than 850°C may lead to mercury condensation and prevent the lamp from reaching stable operation conditions; temperatures higher than 950°C may lead to premature failures of the lamp.
Output is understood as total energy in the range 320 500 nm focusedon an aperture with diameter d at working distance a in front of the reflector.

Technical Specs

Product Information
Abbrev. With Packaging Info.	HXPR120W45CVIS 85V 2/CS 1/SKU
Application	Medical and industrial fiber optics
Average Rated Life (hr)	2000
Base	Special
Beam Angle (deg)	22.4
Bulb	T67
Class	C (gas)
Color Temperature (K)	9500
Current (A)	1.4
Diameter d (in)	2.638
Diameter d (mm)	67.00
Family Brand Name	HXP®
Hot Restart	Yes
Lamp Finish	Clear
Length l1 (mm)	77
Length l1 max. (mm)	77
Luminous Flux (lm)	2800
Maximum Base Temperature °C	0
Maximum Overall Length - MOL (mm)	77
Nominal Voltage (V)	85.00
Nominal Wattage (W)	120.00
Operating Position	p 20
Type of Current	AC
Working Distance a (mm)	45